This solderless version of our 5-Way Kits are hand assembled buy us in the UK to improve your tone!  We take great pride in using the best components that work and sound better than the stock electronics often found in your guitar.  We start by sorting through the already great CTS "CG" pots to create matched sets to give you an even response when rolling down your volume and tone controls.  We then fit a Jupiter Yellow Vintage Tone Capacitor which offer a clear smooth control and sound great.  Like our other kits you can customise this kit with an RS Superpot upgrade and a 0.022uf capacitor for a more gentle tone control.

All you need to install this solderless kit is a small screwdriver to fit the hot and ground wires to the wider block and the wires from the pre wired socket to the 3 position block where you also fit the wire from the claw.

This kit is mounted on a 50's style aluminium shield plate so there is no need to run a ground wire to each of the pots and you just drop the whole thing in as is.

It will drop into most Mexican or American Fender Strats with no modification.  If you are installing this on a guitar with metric sized pots you may need to ream your control plate holes to accept the slightly larger US-Spec pots and buy US-Spec knobs.

Our Blender wiring has 1 volume, 1 master tone, and a Blender pot. In the neck position you can blend the bridge pickup in as much as you want. In the bridge position you can blend the neck pickup in as much as you want. In positions 2 and 4 you can have all three pickups on at once. The nicest part about it is the fact of it being so user friendly.

In the Kit:

• (2) TVT CTS 250K Split Shaft Matched Set Potentiometers with 9.5mm (3/8") Shaft Diameter and 6.0mm Threaded Length.
• (1) CTS 250K Blender Pot with 9.55mm (3/8") Shaft
• (1) CRL 5-Way Switch 
• (1) Switchcraft 1/4" Mono Input Jack 
• (1) 0.05uf Jupiter Yellow Vintage Capacitor. 
• (1) Aluminium Ground PLate
• Wiring Diagram

Control Layout:

• Master Volume
• Tone
• Blend

Switch & Blender Pot Funcion:

With the Blend Pot on 10 the 5 Way switch acts in the normal way

1. Bridge
2. Bridge & Middle in Parallel
3. Middle
4. Middle & Neck in Parallel
5. Neck

As you turn the Blender Pot towards 1:

Position 1: Bridge w/ Neck Pickup Faded in

Position 2: Bridge & Middle w/ Neck Pickup Faded in

Position 3: Middle

Position 4: Middle & Neck w/ Bridge pickup Faded in

Position 5: Neck w/ Bridge Pickup Faded in