Aluminium Jazzmaster Pickguard Shield

Item number: CH50013

Banish cycle hiss and hum from mains when lighting and other equipment is on the same circuit as the stage and from stray radio signals.  No wiring required just fit on the underside of your pickguard.

Especially made for Charles Guitars, these aluminium shield plates are cut from 0.4mm sheet stock and there are no burs or tool marks that are common with other die stamped plates. .

Screw holes are oversized to allow for some variation but the aluminium is very easy to drill for additional holes.

Leo Fender, being a radio engineer, knew a thing or two about interferance and so when he made the jazzmaster he fitted a shield plate to control interferance.

These plates are cut for USA vintage pickguards but can easily be customised to fit others as long as the outline is similar.

Specification:

  • 0.40mm aluminium sheet stock
  • Laser cut
  • Fits USA vintage spec Jazzmaster
  • Period correct.
  • No cutting and sticking, it's held in place by the pots and pickups.
  • It can be removed and used in another guitar.
  • No need to run an earth wire between the pots as the Aluminium Shield carries the earth

With your Guitar Shielded you can eliminate the "click" that you get when you touch the string as well as other hiss and hum.

£15.42 No UK VAT applied (exc. 20% VAT)